Penn Saltwater Spinning Reels

penn saltwater spinning reels
Anti broken system reverses the conventional coil?

Hello, I have an old Penn saltwater reel 155 and anti reverse system seems to be broken. There is a switch on or off and each time I go online, simply turn the lever back. what could be the problem? How I can solve this problem? "Thank you

It is a lever on the handle on the right side of the coil. Leverage is the switching valve. Penn has called this part "eccentric lever" and is attached to your reel, called a screw "Eccentric screw. If you do not see above the lever slides out / handle, these pieces have disappeared. The cost of these parts must be below $ 5.00 before shipping and handling. Your reel handle should not go back at all. If he turns around, then parts inside the coil is not installed correctly. I think his "eccentric Jack languishes languishing gear and yoke Assembly has not been installed correctly. This could easily be served less than five minutes in experienced hands. Every place that offers a coil of service can do for you at low prices. You can do it yourself. You Penn will need a diagram 155 diagrams, simple tools, and a lot of confidence. If you decided to do it yourself, you should check first the missing pieces. The experience can be frustrating, but most people could do. The most frustrating is the keeping of dogs and the dog in the spring, while putting the reel back together. We also need to pay some attention to install the dock of the cam, the spring is high enough and you do not want all the objects flying in their eyes. I hope you can not put it all together to correct the first two times. But do not worry. 155 Peen is not as complicated than that and you should be able to assemble the puzzle after several attempts. 155 Penn patterns: http://www.scottsbt.com/catalog/store/images/pennparts/schematics/155lh.pdf Tips: The pinion must move moving the cam lever. You should be able to hear or feel their work or not return to work. Tips The moving parts are held together by screws on the right side. When these screws are missing, the internal parts move. It is very hard to hold parts in place without screws. Use the screws along other parts of the coil to keep the internal parts in place and screw the long screw holes on the inside (opposite side). When you need to tighten the screws properly, the back of the long screws a bit like ordinary screws advances, the long screw will also guide rods. Did not understand anything I said before now. However, you will find when you have parties parties on the site. PS: If you spend $ 15 or more on parts and labor, the purchase of another coil will best option. You can find used Penn 155 on the price on eBay if you are patient enough. If this happens, keep your existing spool of a reel of parts. —————————————– —— Added: If you can not wait to read all this, there are videos on youtube Penn reel interview. There is also some Penn reel interview / advice of someone who knows reconstructed many Web pages. These videos definitely help and advice.